Clever WorksLogin

Working with professionals

Soakaway tests and drain surveys for architects, engineers and surveyors

When a planning condition, a build-over application or a purchase depends on drainage evidence, you need it measured properly and reported so the next person can use it. That is the work we do, from Farnham, across Surrey and Hampshire.

BRE365 soakaway tests for planning and design

We excavate the trial pit, bring the water, run the three fills and report the infiltration coefficient for your drainage designer. Our own Percologger records the water level between visits, including overnight where the site can be left safely, so a slow test is recorded and not estimated. See the BRE365 percolation testing service.

£1,500 fixed for one test location. That covers excavation of the trial pit, water, the three fills with Percologger monitoring, reinstatement and your report. There is no VAT to add. Further test locations are quoted separately.

  • We test at the positions and depths your designer specifies.
  • The price is fixed for the agreed scope, however slowly the ground drains.
  • The report follows the day after the final testing visit.
  • Incomplete or poor results are reported as they are. We do not extrapolate a result to make a design work.

Our guide to what Surrey and Hampshire councils ask for on soakaway tests links to the county and local documents for Waverley, Guildford, Rushmoor, Hart and East Hampshire.

CCTV drain surveys

We survey private drains with crawler and push-rod cameras and report what we find, coded to WRc MSCC5 and BS EN 13508-2. Typical instructions from professionals are:

  • Before design or build-over. Locating and recording the drains and chambers an extension or new building will cross or connect to.
  • Before purchase. A homebuyer drain survey where the building survey has flagged the drains or cannot inspect them.
  • Condition and defects. A coded survey with recommendations where movement, damp or repeated blockages point to the drains.

See the CCTV drainage survey service for what a survey includes and an example report.

How to instruct us

  • Send the site address and postcode, and say who the report is for.
  • For a soakaway test, send the designer’s pit positions, depths and specification if you have them.
  • For a survey, send a plan or sketch of the drains in question, and say what decision the report needs to support.
  • Tell us about access, buried services and any dates the site cannot be used.

Use the quotation form, email hello@clever-works.co.uk or call 01252 917235. You receive a written quotation with the scope set out before anything is booked.

Sending the quotation to your client

Often the practice asks for the price and the client pays. The quotation page has a Send to my client button. Your client receives their own link to review, accept and pay, and you are copied on the email. Where online booking is offered, they choose the dates themselves.

If you instruct us regularly, colleagues at your practice can be given access to the same quotations, bookings and reports in the client portal. Ask us to set that up.

Checks you may need for your records

We are SafeContractor approved and hold public liability insurance. Our accreditations page lists the training and standards we work to. Ask us for certificates if your project file needs them.

Questions from practices

Can you quote from our drawings or drainage specification?

Yes. Send the site address, a plan showing the proposed soakaway or the drains in question, and any specification from the drainage designer. For a BRE365 test we quote for the positions and depths the designer has set. For a CCTV survey we quote for the runs and chambers you need recorded.

Who pays, us or our client?

Either. The quotation can be accepted and paid by your practice, or you can send it to your client from the quotation page so they accept and pay directly. You are copied on the email that goes to them.

What will the BRE365 report give the drainage designer?

The trial pit location and dimensions, ground observations, the recorded fall for each fill and the infiltration coefficient in metres per second, with the calculation. Interpolated and incomplete results are identified. The designer applies the figure to the soakaway design; we do not present the test as approval of a design.

What standard are your CCTV survey reports coded to?

Observations are coded to WRc MSCC5 and BS EN 13508-2, with photographs, a plan of the runs surveyed and recommendations. Tell us if the report is for a build-over application, a pre-purchase survey or a condition record so the scope matches its purpose.

Ask for a quotation

Tell us the site and what the evidence is for. We reply with a fixed-price quotation you can accept or pass to your client.

Request a quotation

Or call 01252 917235.